BYTDD - 824 6266 CARTRIDGE TONER FOR COPIER I & II
- MSDS: BYTDD
- Manufacturer: IBM CORP
- Product Name: 824 6266 CARTRIDGE TONER FOR COPIER I & II
- National Stock Number: 6850-01-389-9490
Product Identification
Product ID:824 6266 CARTRIDGE TONER FOR COPIER I & II
MSDS Date:07/02/1997
FSC:6850
NIIN:01-389-9490
MSDS Number: BYTDD
Responsible Party
ARMONK, NY 10504-1709
US
Emergency Phone: 800-426-4333/FAX 214-280-3903
Info Phone: 1-800-IBM-4333
Cage: 30874
Contractor
Telephone: 800-426-4333/FAX 214-280-3903
Cage: 30874
Ingredients
ACRYLIC COPOLYMER
CAS: 25608-33-7
Fraction By Weight: 60-65%
MALEATED RESIN
CAS: 8050-28-0
Fraction By Weight: 20-25%
CARBON BLACK
CAS: 1333-86-4
RTECS: FF5800000
Fraction By Weight: 5-10%
OSHA PEL 3.5 MG/M3
ACGIH TLV: 3.5 MG/M3; 9596
POLYVINYL STEARATE
Fraction By Weight: 1-5%
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INHAL:EXPECTED TO BE LOW HAZ FOR
RECOMMENDED HNDLG.EYE:NO SPECIFIC HAZ KNOWN.MAY CAUSE TRANSIENT
IRRIT.SKIN:EXPECTED TO BE LOW HAZ FOR RECOMMENDED
HNDLG.INGEST:EXPECTED TO BE LOW INGEST HAZ.OVEREXPO T O CARBON
BLACK DUST MAY RESULT IN IRRITATION OF RESPIRATORY TRACT & BENIGN
DEPOSITION OF CARBON BLACK IN LUNG.
Explanation of Carcinogenicity:PER MSDS:CARC
CLASSIFICATION:ACGIH/NTP/OSHA:NONE.IARC:CARBON BLACK, 2B.
Effects of Overexposure:TRANSIENT EYE IRRITATION. IRRITATION OF
RESPIRATORY TRACT AND BENIGN DEPOSITION OF CARBON BLACK IN LUNG.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INHAL:SYMPTOMATIC MOVE TO FRESH AIR.TREAT
SYMPTOMATICALLY.SYMPTOMS PERSIST GET MED ATTN.EYE:ANY MATL THAT
CONTACTS EYE SHOULD BE WASHED OUT IMMED W/WATER.SYMPTOMS OCCUR GET
MED ATTN.SKIN:WASH W/SOAP/W ATER.SYMPTOMS OCCUR GET MED
ATTN.INGEST:DRINK 1-2 GLASSES OF WATER.SEEK MED ATTN.NEVER GIVE
ANYTHING BY MOUTH TO UNCONSC PERSON.
Fire Fighting
Autoignition Temp:Autoignition Temp Text:NP
Lower Limits:NP
Upper Limits:NP
Extinguishing Media:WATER SPRAY,CARBON DIOXIDE (CO2), DRY CHEMICAL.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS &
PROTECTIVE CLOTHING.FIRE OR EXCESSIVE HEAT MAY PRODUCE HAZARDOUS
DECOMPOSITION PRODUCTS.
Unusual Fire/Explosion Hazard:POWDERED MATERIAL MAY FORM EXPLOSIVE
DUST-AIR MIXTURES.COMBUSTIBLE SOLID.
Accidental Release
Spill Release Procedures:DONT USE VACUUM CLEANER TO CLEAN UP SPILLS OF
POWDERED TONERS.THE VERY FINE PARTICLES CAN CAUSE FIRE OR
EXPLOSION.SWEEP MATERIAL ONTO PAPER & PLACE IN FIBER CARTON.AVOID
GENERATION OF DUST.CLEAN SURFA CE THOROUGHLY TO REMOVE RESIDUAL
CONTAMINATION.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:AVOID BREATH DUST.USE W/ADEQU
VENTI.POWDERED MATL MAY FORM EXPLO DUST-AIR MIXTURES.MIN DUST
GENERATION/ACCUMULATION.KEEP AWAY FRM IGN SOURCES.
Other Precautions:REF NFPA PAMPHLET#654:"PREVENTION OF FIRE/DUST EXPLO
IN CHEM/DYE/PHARMA/PLASTICS INDUSTRIES".KEEP FROM CONTACT
W/OXIDIZING MATLS.KEEP CNTNR CLSD.MATL HASNT BEEN TESTED FOR ENVIRO
EFFECTS.IN SPILL SITU ATION MATL MAY BE VISUALLY(SUPPLEMENTAL)
Exposure Controls
Respiratory Protection:NONE SHOULD BE NEEDED.
Ventilation:GOOD VENTILATION(TYPICALLY 4-6RM VOL/HR)SHOULD BE
USED.VENTILATION RATES SHOULD BE MATCHED TO CONDITIONS.
Protective Gloves:PROL/REP CONTACT,USE IMPERVIOUS GLOVES.
Eye Protection:GOOD INDUSTRIAL HYG PRAC TO MIN CONTACT.
Other Protective Equipment:WASHING FACILITIES, EYE BATH, SAFETY SHOWER.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
OTHER PRECAUT:HOWEVER ITS NOT EXPECTED TO CAUSE ANY ADVERSE ENVIRO
EFFECTS.
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:NP
Melt/Freeze Pt:M.P/F.P Text:167F,75C
Decomp Temp:Decomp Text:NP
Vapor Pres:NEGLIGIBLE
Vapor Density:NA
Spec Gravity:0.9
pH:NA
Viscosity:NP
Evaporation Rate & Reference:NP
Solubility in Water:NELGIGIBLE
Appearance and Odor:SOLID (POWDER), BLACK COLOR, SLIGHT ODOR
Percent Volatiles by Volume:NA
Corrosion Rate:NP
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:HAZ COMBUSTION PRODUCTS:CARBON
DIOXIDE, CARBON MONOXIDE, OXIDES OF NITROGEN, OXIDES OF SULFUR.
Disposal
Waste Disposal Methods:CAN BE INCINERATED WHEN IN COMPLIANCE W/LOC
REGS.DISCHARGE/TREAT/DISPO SUBJ TO NAT/STATE/LOC LAWS.CHEM SUBJ TO
REPORT REQMTS SEC 313 TITLE III SARA/40CFR3723:NONE.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.